∣ Support ∣
  FAQ
  • Make sure the power is available.
  • Make sure the power cable is functional.
  • Make sure the adapter is functional.
  • Make sure the light of the reader shows yellow color when plugging to the MDS.
  • Go to the MDS setting page→Basic, and make sure that the Card Type is right.
  • Back to the main page, and make sure the light of the reader shows red color when IC card insert to the reader.
  • Make sure to use the right cable.
  • Make sure the cable plug in the right hole of the device and the left RS232 port of the MDS.
  • Set the baud rate to 9600, data bit to 8, parity check to N, and stop bit to 1 if it is enable to modify in the device setting page.
  • Go to the MDS setting page→Switch Mode, and select the right device.
  • Go to the MDS setting page→Wi-Fi, and make sure it connects to Wi-Fi.
  • Make sure the Server computer is functional, and it connects to Wi-Fi. The Server and the MDS must be in the same network.
  • Input http://server_ip:8080/MIISWS/empty.jsp in browser, if the page show 404, restart the server computer. (server_ip is mean the server IP)
  • Go to the MDS setting page→MDS Server, makes sure the server IP is right.
  • Go to the MDS setting page→Wi-Fi, and make sure it connects to Wi-Fi.
  • Make sure the computer of the device connects to Wi-Fi, and in the same network with the MDS.
  • Go to the MDS setting page→Netbios Setting→Net Path
  • Make sure the folder is in the computer and sharable.
  • Make sure it is connectable by pressing “test” button.